1 / 6
RPM Polaris RZR Pro R (4 CYL) 4-Stage Catch Can Recirculation Kit ONLY
Product details
Description
RPM SxS 4-Stage Catch Can Recirculation Kit
Upgrade your 2.0L ProStar Fury 4-cylinder crankcase ventilation system to a fully sealed, professional closed-loop setup with the RPM SXS 4-Stage Catch Can Recirculation Kit! Engineered specifically for the RPM 4-Stage Billet Catch Can installed on the Polaris RZR Pro R platform, this complete conversion kit routes clean, separated crankcase air directly back into your factory intake tract—creating a closed PCV system with zero open atmospheric venting.
Open breather filters vent crankcase blow-by directly into the chassis area, leaving your engine bay prone to oily film, drawing unmetered odors into the cabin, and exposing the crankcase to outside elements. On a massive 2.0L, 225-horsepower naturally aspirated engine operating at high RPMs, crankcase volume demands a clean, dependable, and sealed ventilation circuit. This recirculation kit forms an impermeable barrier against fine dust, silt, sand, mud, and water ingress. By returning filtered air back to the intake tract, it harnesses intake depression for continuous crankcase scavenging while keeping your engine protected during aggressive dune runs, deep water crossings, and muddy riding conditions.
The centerpiece of the kit is a CNC-machined billet aluminum top cap assembly equipped with an integrated -10AN port that rotates a full 360 degrees. This swivel design allows you to clock the hose exit at any angle for clean, kink-free plumbing around the Pro R's chassis rails, high-voltage wiring harnesses, coolant hoses, and intake ducting. Each kit comes complete with a Pro R-specific, high-temperature multi-ply silicone return hose, pre-installed fittings, and all required mounting hardware.
System Specifications & Architecture:
-
System Design: 100% Closed-Loop Recirculation (Zero Atmospheric Breather Venting)
-
Top Cap Construction: CNC-Machined Billet Aluminum with Hard-Anodized Finish
-
Fitting Architecture: 360° Rotational Billet Cap with Swivel High-Flow -10AN Fitting
-
Plumbing: Pro R-Specific Multi-Ply Reinforced Oil- & Fuel-Resistant Silicone Hose
-
Catch Can Compatibility: Fits RPM SXS 4-Stage Billet Catch Cans ONLY
Why Run a Closed-Loop Recirculation System?
-
Complete Environmental Sealing: Blocks fine silt, dust, mud, and water from entering the PCV circuit—vital for wet climates, extreme mud riding, and deep river crossings.
-
Eliminates Cockpit Fumes: Directs all blow-by gasses back into the intake tract, completely eliminating oily vapor smells inside the passenger cab.
-
Sleek, Tucked Aesthetic: Eliminates the exposed top breather filter for a clean, tucked engine bay with zero oily film accumulation on surrounding chassis components.
-
Continuous Vacuum Scavenging: Uses intake tract vacuum to actively pull crankcase pressure away from internal seals without venting oily vapors into the atmosphere.
Features:
-
360-Degree Swivel Billet Top Cap: Full rotational capability allows custom hose clocking at any angle to clear frame crossmembers, roll-cage supports, and intake ducting.
-
Full -10AN High-Flow Capacity: Maximizes crankcase pressure relief with zero restriction, easily handling the high-volume displacement of the 2.0L 4-cylinder engine.
-
Reinforced Multi-Ply Silicone Hose: Custom-molded, oil- and fuel-resistant silicone construction will not soften, degrade, or collapse under high engine bay heat and intake vacuum.
-
100% Direct Bolt-On Installation: Drops directly in place of the factory flush Frogzskin-style mesh top cap or standard filter mount using simple hand tools.
What's Included:
-
(1) RPM SXS CNC-Machined Billet Adjustable 360° Recirculation Top Cap with -10AN Fitting
-
(1) RPM SXS Polaris RZR Pro R Molded Silicone Return Hose
-
(1) Complete Hardware, Clamp, and Fitting Installation Pack
Fitment:
Direct bolt-on conversion for RPM SXS 4-Stage Billet Catch Cans installed on 4-cylinder Polaris RZR Pro R models:
-
Polaris RZR Pro R (2-Seat): 2022–2026 (Sport, Premium, Ultimate, Factory-Racing Editions)
-
Polaris RZR Pro R 4 (4-Seat): 2022–2026 (Sport, Premium, Ultimate, Factory-Racing Editions)
(Note: Designed exclusively for the RPM SXS 4-Stage Billet Catch Can. Does NOT fit RPM Dual Baffle Catch Cans or generic aftermarket catch cans).
Compatibility
This part is compatible with 10 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2026 | Polaris | RZR Pro R | 2 Seat |
| 2026 | Polaris | RZR Pro R | 4 Seat |
| 2025 | Polaris | RZR Pro R | 2 Seat |
| 2025 | Polaris | RZR Pro R | 4 Seat |
| 2024 | Polaris | RZR Pro R | 2 Seat |
| 2024 | Polaris | RZR Pro R | 4 Seat |
| 2023 | Polaris | RZR Pro R | 2 Seat |
| 2023 | Polaris | RZR Pro R | 4 Seat |
| 2022 | Polaris | RZR Pro R | 2 Seat |
| 2022 | Polaris | RZR Pro R | 4 Seat |
Customer reviews
No reviews yet. Bought one of our rebuilds? Tell other riders how it runs.
Verified buyer
5-star reviews on Google
Real words from riders who trusted us with their rebuild.
5.0 rating on Google
“Had Brady and the guys at RPM rebuild my 2022 Polaris Northstar engine. My original engine had lost a rod bearing and had some head damage as well after 11,000 miles. Brady assured me that they would rebuild it to new condition with new parts and that’s exactly what they did. I could not be happier with the experience; you can be confident that these guys will get you taken care of.”
“This is one of the BEST AND SAFEST transactions I have had in a long time. I knew they were different from the way they answered the phone and the trust I felt when they told me they would ship the engine to me first, then I can ship back my core. KEEP UP THE GREAT SERVICE!!”
“Just received my rebuilt motor from RPM. I am a novice at this but the level of customer support and their attention to detail made it easy. All the parts and motor arrived just as they described and were well packaged. These folks know what they are doing.”
“The only place I would trust to rebuild my RZR 1000 Turbo. They went above and beyond and gave me pointers and advice.”
“Excellent service. Super helpful, answered all the questions and got the motor back to me in an extremely fast turnaround.”
“RPM was awesome to deal with and provided great service and information. They made the process easy for someone that knew very little about replacing an engine in my Polaris.”
