1 / 6
Product details
Description
RPM SxS 4-Stage Catch Can Recirculation Kit
Upgrade your supercharged inline-four crankcase ventilation to a fully sealed, professional closed-loop system with the RPM SXS 4-Stage Catch Can Recirculation Kit! Engineered specifically for the RPM 4-Stage Billet Catch Can installed on the Kawasaki Teryx H2 platform, this complete conversion kit routes clean, separated crankcase air directly back into your factory intake tract—creating a closed PCV system with zero open atmospheric venting.
Open breather filters vent crankcase gasses directly into the chassis area, leaving your engine compartment vulnerable to dirt contamination, coating plastics in oily residue, and filling the cabin with raw blow-by fumes. On high-output, supercharged engines like the Teryx H2, crankcase volume and boost pressures require a dependable, sealed setup. This recirculation kit forms an impermeable barrier against fine dust, sand, mud, and water ingress. By returning filtered air to the intake, it harnesses natural intake depression for active crankcase scavenging while keeping your engine protected during aggressive trail runs, deep water crossings, and muddy conditions.
At the core of the kit is a CNC-machined billet aluminum top cap assembly equipped with an integrated -10AN port. The top cap features 360-degree rotation, giving you complete freedom to clock the hose exit at any angle for clean, kink-free plumbing around the Teryx H2’s frame rails, supercharger ducting, coolant lines, and electrical harnesses. Each kit includes a custom-molded, high-temperature multi-ply silicone return hose shaped specifically for the Teryx H2 engine bay, pre-installed fittings, and all required mounting hardware.
System Specifications & Architecture:
-
System Design: 100% Closed-Loop Recirculation (Zero Atmospheric Breather Venting)
-
Top Cap Construction: CNC-Machined Billet Aluminum with Corrosion-Resistant Hard-Anodized Finish
-
Fitting Architecture: 360° Rotational Billet Cap with Swivel High-Flow -10AN Fitting
-
Plumbing: Teryx H2-Specific Multi-Ply Reinforced Oil- & Fuel-Resistant Silicone Hose
-
Catch Can Compatibility: Fits RPM SXS 4-Stage Billet Catch Cans ONLY
Why Run a Closed-Loop Recirculation System?
-
Complete Environmental Sealing: Blocks fine silt, mud, and water from entering the PCV circuit—vital for wet climates, extreme mud riding, and deep river crossings.
-
Eliminates Cockpit Fumes: Directs all blow-by gasses back into the intake tract, completely eliminating oily vapor smells inside the passenger cab.
-
Sleek, Tucked Aesthetic: Eliminates the exposed top breather filter for a clean, tucked engine bay with zero oily film accumulation on surrounding chassis components.
-
Continuous Vacuum Scavenging: Uses intake tract vacuum to actively pull crankcase pressure away from internal seals without venting oily vapors into the atmosphere.
Features:
-
360-Degree Swivel Billet Top Cap: Full rotational capability allows custom hose clocking at any angle to clear supercharger piping, frame crossmembers, and chassis tubes.
-
Full -10AN High-Flow Capacity: Maximizes crankcase pressure relief with zero restriction, easily handling the high-volume blow-by demands of supercharged engines.
-
Reinforced Multi-Ply Silicone Hose: Custom-molded, oil- and fuel-resistant silicone construction will not soften, degrade, or collapse under high engine bay heat and intake vacuum.
-
100% Direct Bolt-On Installation: Drops directly in place of the factory flush Frogzskin-style mesh top cap or standard filter mount using simple hand tools.
What's Included:
-
(1) RPM SXS CNC-Machined Billet Adjustable 360° Recirculation Top Cap with -10AN Fitting
-
(1) RPM SXS Kawasaki Teryx H2 Molded Silicone Return Hose
-
(1) Complete Hardware, Clamp, and Fitting Installation Pack
Fitment:
Direct bolt-on conversion for RPM SXS 4-Stage Billet Catch Cans installed on Kawasaki Teryx H2 models:
-
Kawasaki Teryx H2 (All Trims & Packages): 2025–2026
(Note: Designed exclusively for the RPM SXS 4-Stage Billet Catch Can. Does NOT fit RPM Dual Baffle Catch Cans or generic aftermarket catch cans).
Compatibility
This part is compatible with 2 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2026 | Kawasaki | Teryx H2 | 4 Seat |
| 2026 | Kawasaki | Teryx H2 | 5 Seat |
Customer reviews
No reviews yet. Bought one of our rebuilds? Tell other riders how it runs.
Verified buyer
5-star reviews on Google
Real words from riders who trusted us with their rebuild.
5.0 rating on Google
“Had Brady and the guys at RPM rebuild my 2022 Polaris Northstar engine. My original engine had lost a rod bearing and had some head damage as well after 11,000 miles. Brady assured me that they would rebuild it to new condition with new parts and that’s exactly what they did. I could not be happier with the experience; you can be confident that these guys will get you taken care of.”
“This is one of the BEST AND SAFEST transactions I have had in a long time. I knew they were different from the way they answered the phone and the trust I felt when they told me they would ship the engine to me first, then I can ship back my core. KEEP UP THE GREAT SERVICE!!”
“Just received my rebuilt motor from RPM. I am a novice at this but the level of customer support and their attention to detail made it easy. All the parts and motor arrived just as they described and were well packaged. These folks know what they are doing.”
“The only place I would trust to rebuild my RZR 1000 Turbo. They went above and beyond and gave me pointers and advice.”
“Excellent service. Super helpful, answered all the questions and got the motor back to me in an extremely fast turnaround.”
“RPM was awesome to deal with and provided great service and information. They made the process easy for someone that knew very little about replacing an engine in my Polaris.”
