1 / 13
RPM Gen 4 2017-2022 Ski-Doo 850 NA Titanium Chambered Muffler
Product details
Description
RPM Ski-Doo Gen 4 NA Titanium Chambered Muffler
RPM SXS Gen 4 Ski-Doo 850 E-TEC Naturally Aspirated Titanium Q-Muf Quiet Mechanical Chambered Muffler
Combine whisper-quiet trail manners with maximum 2-stroke power gains and ultra-lightweight titanium construction for your Gen 4 chassis! The RPM N.A. Q-Muf is a high-performing, free-flowing, mechanically chambered quiet muffler engineered specifically for Naturally Aspirated (N.A.) Gen 4 Ski-Doo 850 E-TEC snowmobiles. Only slightly louder than factory sound levels at idle, it delivers massive gains in exhaust velocity, throttle responsiveness, and weight savings.
The secret to the Q-Muf's performance lies in its intelligent internal acoustic architecture. At low RPM and idle, exhaust gases flow through a series of precision pass-through baffles and mechanical chambers to deliver a deep, whisper-quiet sound signature. Under Wide-Open Throttle (WOT), exhaust flow loads the primary chambers and automatically overflows into pass-through channels—allowing exhaust gases to vent freely without power loss, restriction, or backpressure spikes.
Constructed entirely from 100% Titanium with fully welded internals, the Q-Muf weighs in at an astonishing 4.9 lbs total, shedding 11+ lbs off the front chassis compared to the stock muffler. The uniquely designed oval-domed top and bottom muffler body eliminates thermal hot spots and dead zones, ensuring smooth exhaust scavenging. It features an integrated bottom titanium snow plate to block fumes and packed snow from entering the chassis tunnel when submerged in deep powder, as well as an ultra-tough dual-wall titanium exit tip built to withstand hard impacts from rocks and tree stumps.
Performance Metrics & Weight Savings:
-
Horsepower Gain: +2 to +4 HP Increase
-
Total System Weight: 4.9 lbs
-
Total Weight Savings: Sheds 11+ lbs compared to the heavy stock muffler
-
Material & Construction: Full Titanium Structure with Fully Welded Internals
-
Sound Level Profile: Slightly louder than factory at idle; free-flowing and controlled under WOT
-
Exit Tip Construction: Heavy-Duty Dual-Wall Titanium
-
Warranty: Backed by RPM's 3-Year Manufacturer Warranty
-
ECU Tuning Required: None (Direct drop-in and go)
Features:
-
Smart Mechanical Chambered Design: Transitions seamlessly between whisper-quiet baffled idling and high-CFM free-flowing exhaust pathways under full throttle.
-
Sheds 11+ lbs of Front-End Weight: Extremely lightweight 4.9 lb titanium build improves front-end agility, side-hilling control, and deep powder flotation.
-
2–4 HP Performance Increase: Maximizes exhaust gas velocity to improve power delivery and deliver instant throttle response in technical terrain.
-
Integrated Bottom Snow Plate: Built-in titanium plate seals the belly pan to keep snow and exhaust fumes out of the tunnel when submerged in deep snow.
-
Heavy-Duty Dual-Wall Titanium Tip: Protrudes further than competitor mufflers for clean exhaust deflection while shielding the outlet from rock and stump impacts.
-
Oval Domed Muffler Body: Prevents thermal hot spots and exhaust fume dead zones for maximum gas velocity and longevity.
-
Over-Built Mounting Brackets: Extra-duty reinforced titanium mounts prevent bracket fatigue and failure under severe mountain riding abuse.
-
100% Direct Bolt-On Setup: Uses original factory mounting points and spring locations with zero body cutting or ECU re-flashing required.
What's Included:
-
(1) RPM SXS Gen 4 N.A. Titanium Q-Muf Quiet Mechanical Chambered Muffler Assembly
-
(1) Integrated Bottom Titanium Snow Plate
Fitment:
Direct bolt-on replacement for Gen 4 chassis Naturally Aspirated (N.A.) Ski-Doo 850 E-TEC snowmobile models:
-
Ski-Doo Summit 850 E-TEC (Gen 4 Chassis): 2017–2022
-
Ski-Doo Freeride 850 E-TEC (Gen 4 Chassis): 2017–2022
-
Ski-Doo MXZ 850 E-TEC (Gen 4 Chassis): 2017–2022
-
Ski-Doo Renegade 850 E-TEC (Gen 4 Chassis): 2017–2022
Compatibility
This part is compatible with 6 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2022 | Ski-Doo | 850 E-TEC | Gen 4 NA |
| 2021 | Ski-Doo | 850 E-TEC | Gen 4 NA |
| 2020 | Ski-Doo | 850 E-TEC | Gen 4 NA |
| 2019 | Ski-Doo | 850 E-TEC | Gen 4 NA |
| 2018 | Ski-Doo | 850 E-TEC | Gen 4 NA |
| 2017 | Ski-Doo | 850 E-TEC | Gen 4 NA |
Customer reviews
No reviews yet. Bought one of our rebuilds? Tell other riders how it runs.
Verified buyer
5-star reviews on Google
Real words from riders who trusted us with their rebuild.
5.0 rating on Google
“Had Brady and the guys at RPM rebuild my 2022 Polaris Northstar engine. My original engine had lost a rod bearing and had some head damage as well after 11,000 miles. Brady assured me that they would rebuild it to new condition with new parts and that’s exactly what they did. I could not be happier with the experience; you can be confident that these guys will get you taken care of.”
“This is one of the BEST AND SAFEST transactions I have had in a long time. I knew they were different from the way they answered the phone and the trust I felt when they told me they would ship the engine to me first, then I can ship back my core. KEEP UP THE GREAT SERVICE!!”
“Just received my rebuilt motor from RPM. I am a novice at this but the level of customer support and their attention to detail made it easy. All the parts and motor arrived just as they described and were well packaged. These folks know what they are doing.”
“The only place I would trust to rebuild my RZR 1000 Turbo. They went above and beyond and gave me pointers and advice.”
“Excellent service. Super helpful, answered all the questions and got the motor back to me in an extremely fast turnaround.”
“RPM was awesome to deal with and provided great service and information. They made the process easy for someone that knew very little about replacing an engine in my Polaris.”
