1 / 15
RPM CFMoto Z10 3" Chambered Muffler Full Exhaust System
Ships in 1–3 days
Product details
Description
RPM CFMoto Z10 3" Chambered Muffler Full Exhaust System
RPM SXS brings our industry-leading chambered exhaust technology to the CFMoto Z10 platform!
We took everything we’ve learned from our X3 Q-Series and Pro R Chambered Mufflers—the exact same chambered technology that has become the most in-demand muffler design on the market—and built it specifically for the Z10.
This is a mechanically chambered muffler that uses zero packing for sound deadening. Instead, it utilizes a series of uniquely designed internal chambers and baffle plates to sound deaden while preserving the massive CFM and high exhaust velocity the Z10 platform demands. At wide-open throttle (WOT), the muffler loads the chambers with exhaust flow and overflows CFM into pass-through channels, allowing the exhaust to flow freely. When you back off the throttle, the drastically reduced flow returns through the internal mechanical baffles, delivering a deep, quiet, tone.
Essentially, this is a nearly stock-sounding exhaust that flows enough CFM for BIG tunes and turbo upgrades!
The best part? You get an impressive 15 HP gain over stock—with NO TUNE required!
Note: While this system is a direct bolt-on upgrade, custom ECU tuning through LaRue Performance is strongly recommended to optimize air-to-fuel ratios and maximize overall horsepower gains.

Built Without Compromise
Constructed inside and out from premium 304 stainless steel and 100% TIG welded, this system is built to handle the absolute worst terrain you can throw at it. The same 304 stainless steel used on our highest-horsepower builds—from the Maverick R to the RZR Pro R and Supercharged H2—goes into this system. No corners cut, no compromises.
Choose Your Mid-Pipe Setup:
Tailor your Z10’s sound and performance with your choice of mid-pipe:
-
Standard 3" Straight Mid-Pipe: Delivers a deep, smooth, and consistent performance exhaust note across the entire RPM range.
-
3" E-Valve Mid-Pipe (Captain's Choice): The ultimate dual-mode experience! Cruise quietly through neighborhoods and trailheads using the chambered muffler, then flip the switch to unleash raw, straight-pipe exhaust when it's time to throw down. Flip it back closed to instantly return to the deep, quiet chambered tone.
(Note: The 15 HP gain holds true with either mid-pipe option!)
Features:
-
Proven 15 HP Gain Over Stock: Real dyno-proven power gains with NO TUNE required.
-
No Wearable Packing: Fully mechanical internal chamber design means it will never blow out packing or get louder over time.
-
Full 3" Exhaust System: Maximizes CFM capacity for stock machines, big tunes, and turbo upgrades.
-
Massive Weight Savings: Drops 21 lbs over stock with the standard mid-pipe (17 lbs lighter with the E-Valve setup).
-
304 Stainless Steel Construction: Premium aircraft-grade stainless steel inside and out.
-
100% TIG Welded: Superior strength, durability, and clean appearance.
-
Optional E-Valve Captain's Choice Kit: Includes a plug-and-play wiring harness and a backlit rocker switch for instant volume control on the fly.
-
Complete Drop-In Kit: Ships with EVERYTHING needed for a seamless installation.
-
Limited Lifetime Warranty: Backed by RPM SXS quality guarantee.
What’s Included in the Kit:
-
(1) RPM SXS 304 Stainless Steel Chambered Muffler
-
(1) 3" Stainless Steel Mid Pipe (Standard or E-Valve based on selection)
-
(1) Complete E-Valve Plug-and-Play Harness & Dash Switch (Included with E-Valve Option)
Fitment:
-
CFMoto Z10 (2-Seat & 4-Seat models — All Years)
Note: If running an ECU tune with any RPM SXS CFMoto Z10 exhaust, your ECU must be flashed specifically for this free-flowing exhaust system (we suggest LaRue Performance). Generic off-the-shelf tunes may not be compatible.

CFMoto Z10 Exhaust comparison
Power · Sound · Weight
| Configuration | Peak HP | Gain | dB @ 4k | dB w/ E-Valve Open @ 4k | Weight | Savings |
|---|---|---|---|---|---|---|
| Stock | 154 | Baseline | 87 | - | 45 lbs | - |
| RPM Dual Sport | 174 +20 | +11% | 97 | 103 | 23 lbs | -21 lbs |
| RPM Chambered | 169 +15 | +9% | 93 | 103 | 23 lbs | -21 lbs |
| RPM Race Exhaust | 174 +20 | +11% | 103 | 103 | 13 lbs | -31 lbs |
Compatibility
This part is compatible with 4 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2027 | CF Moto | Z Force Z10 | 2 Seat |
| 2027 | CF Moto | Z Force Z10 | 4 Seat |
| 2026 | CF Moto | Z Force Z10 | 2 Seat |
| 2026 | CF Moto | Z Force Z10 | 4 Seat |
5-star reviews on Google
Real words from riders who trusted us with their rebuild.
5.0 rating on Google
“Had Brady and the guys at RPM rebuild my 2022 Polaris Northstar engine. My original engine had lost a rod bearing and had some head damage as well after 11,000 miles. Brady assured me that they would rebuild it to new condition with new parts and that’s exactly what they did. I could not be happier with the experience; you can be confident that these guys will get you taken care of.”
“This is one of the BEST AND SAFEST transactions I have had in a long time. I knew they were different from the way they answered the phone and the trust I felt when they told me they would ship the engine to me first, then I can ship back my core. KEEP UP THE GREAT SERVICE!!”
“Just received my rebuilt motor from RPM. I am a novice at this but the level of customer support and their attention to detail made it easy. All the parts and motor arrived just as they described and were well packaged. These folks know what they are doing.”
“The only place I would trust to rebuild my RZR 1000 Turbo. They went above and beyond and gave me pointers and advice.”
“Excellent service. Super helpful, answered all the questions and got the motor back to me in an extremely fast turnaround.”
“RPM was awesome to deal with and provided great service and information. They made the process easy for someone that knew very little about replacing an engine in my Polaris.”
