1 / 6
RPM Can-Am Maverick R 4-Stage Oil Catch Can Recirculation Kit ONLY
Product details
Description
RPM SxS 4-Stage Catch Can Recirculation Kit
Upgrade your 240HP Rotax 999T crankcase ventilation system to a complete, sealed closed-loop setup with the RPM SXS 4-Stage Catch Can Recirculation Kit! Engineered specifically for the RPM 4-Stage Billet Catch Can on the Can-Am Maverick R, this kit routes clean, separated crankcase air directly back into your factory intake tract—delivering a fully closed PCV system with zero open atmospheric venting.
Open breather filters vent directly into the engine bay or cabin area, exposing your crankcase to outside contaminants and filling the cockpit with oily vapors. This closed-loop recirculation kit completely eliminates raw oil vapor smells while forming an impermeable barrier against trail dust, sand, mud, and water. By returning filtered air back through the intake tract, it creates continuous PCV scavenging while protecting internal engine components during aggressive water crossings and deep mud bogs.
The centerpiece of the kit is a CNC-machined billet aluminum top cap assembly featuring an integrated -10AN port that rotates a full 360 degrees. This swivel design allows you to clock the hose exit in any direction for clean, kink-free plumbing around the Maverick R's chassis tubes, wiring harnesses, dual-clutch transmission components, and charge tubes. Each kit comes complete with a Maverick R-specific, high-temperature multi-ply silicone return hose, pre-installed fittings, and all necessary mounting hardware.
System Specifications & Architecture:
-
System Design: 100% Closed-Loop Recirculation (Zero Atmospheric Venting)
-
Top Cap Construction: CNC-Machined Billet Aluminum with Hard-Anodized Finish
-
Fitting Architecture: 360° Rotational Billet Top Cap with High-Flow -10AN Fitting
-
Plumbing: Maverick R-Specific Multi-Ply Reinforced Oil- & Fuel-Resistant Silicone Hose
-
Catch Can Compatibility: Fits RPM SXS 4-Stage Billet Catch Cans ONLY
Why Run a Closed-Loop Recirculation System?
-
Complete Environmental Sealing: Prevents fine silt, water, mud, and trail debris from entering the PCV circuit, making it mandatory for wet climates, deep river crossings, and mud riding.
-
Eliminates Cab Oil Fumes: Directs all blow-by gasses back into the intake tract to completely eliminate oily vapor smells inside the passenger compartment.
-
Sleek, Tucked Aesthetic: Replaces the exposed top breather filter with a low-profile, clean-routed hose assembly that keeps surrounding bodywork and frame rails spotless.
-
Intake Vacuum Scavenging: Harnesses natural intake tract depression to actively evacuate crankcase pressure without venting unmetered vapors into the atmosphere.
Features:
-
360-Degree Swivel Billet Top Cap: Full rotational adjustability allows custom hose routing at any angle to avoid frame rails, intercoolers, and roll-cage supports.
-
Full -10AN High-Flow Capacity: Sized to match heavy crankcase volume demands, preventing backpressure buildup even on aggressive, high-boost builds.
-
Reinforced Multi-Ply Silicone Hose: Oil-, fuel-, and heat-resistant silicone plumbing engineered not to harden, crack, or collapse under high vacuum and engine bay temperatures.
-
100% Direct Bolt-On Installation: Precision-machined to drop directly in place of the factory flush Frogzskin-style mesh top cap or standard filter mount using simple hand tools.
What's Included:
-
(1) RPM SXS CNC-Machined Billet Adjustable 360° Recirculation Top Cap with -10AN Fitting
-
(1) RPM SXS Can-Am Maverick R Reinforced Silicone Return Hose
-
(1) Complete Hardware, Clamp, and Fitting Installation Pack
Fitment:
Direct bolt-on conversion for RPM SXS 4-Stage Billet Catch Cans installed on the Can-Am Maverick R platform:
-
Can-Am Maverick R (All Models & Trims): 2024–2026 (Base, X, X RS, X RS with Smart-Shox, MAX 4-Seat)
(Note: Requires the RPM SXS 4-Stage Billet Catch Can. Does NOT fit RPM Dual Baffle Catch Cans or generic aftermarket catch cans).
Compatibility
This part is compatible with 10 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2027 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2027 | Can-Am | Maverick R | Turbo (2 Seat) XRC |
| 2027 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
| 2026 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2026 | Can-Am | Maverick R | Turbo (2 Seat) XRC |
| 2026 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
| 2025 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2025 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
| 2024 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2024 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
Customer reviews
No reviews yet. Bought one of our rebuilds? Tell other riders how it runs.
Verified buyer
5-star reviews on Google
Real words from riders who trusted us with their rebuild.
5.0 rating on Google
“Had Brady and the guys at RPM rebuild my 2022 Polaris Northstar engine. My original engine had lost a rod bearing and had some head damage as well after 11,000 miles. Brady assured me that they would rebuild it to new condition with new parts and that’s exactly what they did. I could not be happier with the experience; you can be confident that these guys will get you taken care of.”
“This is one of the BEST AND SAFEST transactions I have had in a long time. I knew they were different from the way they answered the phone and the trust I felt when they told me they would ship the engine to me first, then I can ship back my core. KEEP UP THE GREAT SERVICE!!”
“Just received my rebuilt motor from RPM. I am a novice at this but the level of customer support and their attention to detail made it easy. All the parts and motor arrived just as they described and were well packaged. These folks know what they are doing.”
“The only place I would trust to rebuild my RZR 1000 Turbo. They went above and beyond and gave me pointers and advice.”
“Excellent service. Super helpful, answered all the questions and got the motor back to me in an extremely fast turnaround.”
“RPM was awesome to deal with and provided great service and information. They made the process easy for someone that knew very little about replacing an engine in my Polaris.”
